Ten Tips To Plan A Stress-Free Loft Conversion

It’s important to determine exactly what a loft conversion will involve and how the design of your home will be affected before actually beginning a loft conversion. Here are ten tips to make note of and follow if you are currently determining whether or not a loft conversion is the best way to add more value to your property.

Even though it may be only a modest increase, a loft conversion will definitely add weight to your home. In this case, you will want to take all necessary steps to ensure that the overall structure of your home can handle this kind of weight. You will need to expose and check such things as lintils, beams, and the foundation itself, as these will carry the majority of the weight.
You will want to dig a small hole in order to properly expose the foundations first, as this will allow the Building Control officer to fully inspect this area. If it’s determined that your home will need underpinning in order to support all of the weight, expect your overall budget to be doubled.

You will need to obtain the services of a designer to properly illustrate exactly how much headroom your loft will contain once it has been fully converted. It’s also important not to forget that you will need a staircase leading to the new loft area, which should generally rise above the old staircase and not come from any existing bedroom.
You may also have to replace the hot water and heating systems with a sealed system due to there no longer being sufficient roof space for these systems.

Whether or not they need any actual planning permission, lofts conversions always require approval through Building Regulations; therefore, before locating a builder, consider adopting a full plans application approach and come up with a detailed scheme. A builder will be able to give you a more detailed quote if you have an approved design in place.

The majority of traditional cut and pitched roofs are constructed with internal support struts that prop up the horizontal roof beams and the rafters, while making up the web of braces in modern trussed rafter roofs.
There are a few different ways to adjust the roof for a loft conversion, but regardless of the method you select, the ceiling joists will almost certainly be inadequate to the floor joists. The best option will be to have the joists rise above the current existing joists in order to make up the floor structure. These will either bear onto newly-installed beams or the existing plates of internal and external load bearing walls.

The overall space for loft stairs is tight, which can make them tricky to design. When planning a loft conversion, it’s important to keep in mind that purpose-built loft staircases cost around ten times more than standard staircase designs.
Before finalizing any kind of staircase design, be sure to have it approved by your Building Control officer. You also will want to make sure that the staircase leads to a fire exit to allow people to safely escape should a fire break out in the home.

If you’re looking to install skylight windows, you will not need to make a lot of structural alterations, which means they will be relatively easy to install. On the other hand, Dormer windows are more complex, as these kinds of windows have walls and a roof, as well as the window itself. Dormer windows are also more complicated in that they require prior planning permission; however, they can also maximize the overall headroom in the loft.

When taking on a loft conversion, it’s extremely important to consider features that will upgrade the overall fire safety, according to a friend of my fathers. For instance, the new floor in the loft will need approximately 30 minutes of fire protection, you will need one escape window per room in the loft, and the loft itself will need to be separated from the rest of the home by a fireproof door, which should be located either at the top or bottom of the new staircase. You also will want to include efficient smoke alarms as part of the loft’s electrical plan.

Loft conversions can be difficult to insulate, especially in light of the overall increase in standards. Insulation will need to be properly cut and fitted into the sloped ceiling, with the insulation itself being cut as thin as possible. It’s important that a high-performance insulation of some kind is installed.

Two common areas of the loft that should be soundproofed are the walls and flooring. Rather than using a lighter thermal insulation material to do the job, consider instead using a denser sound insulation quilt. When followed up by covering the material with a sound-rated plasterboard, your insulation against sound will be complete.

With a loft conversion also comes a loss of storage space. However, there are two different solutions that you can take advantage if. The first involves investing in storage bins or crates, while the second involves constructing a built-in wardrobe, which generally fits well iin the bedroom of a loft.

If you would like to add an extension to your Oxford home, visit touchstonebuilders.co.uk.